Header Graphic

VibeAway™ pads are specially designed washing machine anti-vibration pads for washing machines and dryers. The 100% crumb rubber pad, made from recycled tires, is designed to reduce the transfer of vibration that occurs in most typical washing and drying cycles. It is a shock absorption pad that is used to reduce sound, vibrations, and pulsating of washing machines, dryers, table saws, freezers and other large appliances. Our VibeAway™ pads prevent washing machines from "walking," and help prolong the life of your washing machine, dryer or other appliance. They also reduce the need to reinforce upper level floors to reduce vibration and noise. The pads have a full refund guarantee.

  • Reduces the transfer of vibration
  • Prevents washing machines from "walking"
  • Protect floors
  • Made from 100% recycled tire rubber, address important environmental concerns
  • Recessed for easy guidance for foot of washing machine/dryer
  • 30 day money back guarantee

VibeAway™ pads, made from 100% recycled tire rubber, address important environmental concerns and problems facing the planet today.

How big is the problem of worn out tires? In 2003, the Rubber Manufacturers Association estimated that there were 275 million tires in stockpiles across the United States, and that approximately 290 million scrap tires are added each year. Scrap tires provide an ideal breeding ground for mosquitoes, which carry and transmit life-threatening diseases such as encephalitis, West Nile and Eastern Equine virus, and dengue fever in some regions. Stockpiles can also catch on fire as a result of lightning strikes, equipment malfunctions or arson.

B Green Innovations is an American owned and operated company. Partners to reduce the environmental impact of waste, and to operate only utilizing "green" technologies and products formed the company. One solution was to utilize used tires to address the serious problem concerning high-speed front load washing machine vibration and noise. Because front load washing machines spin extremely fast, proper balancing is critical. This problem is increased on upper level laundry room floors thus creating vibration of your "walking" washing machine. The manufacturers recognized the problem and recommend that homeowners reinforce upper level floors which is expensive and not practical. B Green's VibeAway™ pads can also be used on top load washing machines to prevent "walking," and can also be placed under dryers to create a level working surface between washing machines and dryers.

For more information on our products, call us at 877-996-9333. If there are any problems with your purchase, please contact us.

Patent Pending for VibeAway™ Pads. VibeAway™ is a trademark of B Green Innovations, Inc.

Set Up Instructions:

Make sure that the washing machine is flat before setting up the pads. Elevate one side at a time, put pads under the feet of the washing machine. (Help may be needed lifting the machine.) Utilizing two people is the recommended method for installation. Make sure that the feet of the unit fit soundly in the recess of the pad. Be sure that the pads do not move or turn under the feet. It may be required to adjust the feet somewhat to hold the pads steadfast to the floor.

B Green Innovations, Inc. assumes no accountability for individual injury, mechanical or physical damage when installing or when pads are being utilized. Pads should be installed by a trained professional. B Green is not responsible for any damage to the floor should it occur. VibeAway will not help decrease vibration of severely unbalanced loads. These pads are manufactured to help diminish the transfer of vibration from washing machines and dryers. B Green Innovations, Inc. will not be responsible for pads that are incorrectly installed or not for their intended use.

Helpful Hints:

  • Leave lid of washer open after use to allow machine to dry out, this will help prevent stale smells.
  • DO NOT use pre-wash sprays near machine, as it will damage the paintwork, particularly the graphic panel.
  • When using powder detergents mix first with warm water to dissolve powder before adding to wash.
  • At least once a year, wash the machine out with 2 tablespoons of bicarbonate of soda, one scoop of the normal used wash powder, fill the machine with HOT water and allow the machine to run through a long normal cycle (NO CLOTHES).
  • Always use a little higher water level to allow the clothing to move around freely, to save wear of the machine and clothing.
  • Don't over use washing powders.
  • Turn off taps and de-pressure hoses after use.

How much detergent do I need for each load?

This depends on the hardness of your water and the soil in your clothing. Softened water requires quite a bit less detergent than hard water--yet the more soiled the clothes, the more detergent you need to clean them. See the instructions on the detergent package for specific guidelines. If soap suds remain at the end of the cycle, you are probably using too much detergent.

How do I know how many clothes to put into the washer?

For a top loader, a general rule of thumb is to lay clothes loosely inside the washer until they reach the top of the agitator. For a front loader, fill it until it's full, with minimal compression of the clothes.

Why do some clothing dealers suggest washing clothes inside out?

In the washer, the clothes often turn inside out during the agitation cycle. Turning the clothes inside out first may be easier on the clothing. It limits abrasion on the “good” side of the fabric, reducing “pilling” and extending the life of some fabrics such as corduroy. In addition, any embroidery, decals, and so on are better preserved. It should not affect the performance of the cleaning action to have the clothes inside out during wash.

Does this happen at your home?

Click to view video

VibeAway Package




VibeAway Product Displays - Click to Enlarge
VibeAway Display 1
VibeAway Display 2


Privacy Statement   |   Terms Of Use Copyright 2008 - B Green Innovations
EcoPod™ VibeAway™ FAQs Project Complete Link